IPT’s High Pressure Tubing is rated for use in temperatures from -100° to 600°F (-73° to 315°C), with maximum working pressure of 20,000 PSI (1030 bar) or 60,000 PSI (4140 bar). Tubing is supplied in 18-22 ft. lengths, with custom lengths available upon request.
Components
Kavlico Pressure Sensors for Hydraulic Applications
Suite of sensors are capable of operating for millions of pressure cycles, these low power consumption pressure sensors provide an accurate, reliable, and stable signal over many years of operation in the harshest environments.
HAWE Hydraulics Introduces Type PLVC 8×2
PLVC 8×2 line of programmable logic valve controls is designed for ample control of complex hydraulic systems. The instantaneous cycle times of the control make it a perfect match for complex regulating and control tasks.
Stop Fugitive Emissions from Ball Valves
To control fugitive emissions from ball valves, the key is to select the right valve. That requires a careful look at two design features: body seal design and stem seal design.
HAWE Hydraulics’ Durable Directional Seated Valve
HAWE Hydraulics introduces the newest member of directional seated valves, known for their ability to stop flow without leakage.
HAWE Hydraulics Type CLK Pressure Control Valve
CLK pressure control valve has safety function that provides operational ease within hydraulic systems where temperature increases and/or external load peaks can lead to unnecessary results.
Medium and High Pressure Products Guide from IPT
Medium and High Pressure Products Guide provide overview of IPT’s family of medium and high pressure valves, fittings and tubing, as well as custom solutions and specialty products, including key features and specifications.
HydraForce to Release i-Design Version 3
HydraForce’s i-Design Version 3 is designed for hydraulic controls and sales engineers who would like to integrate, simplify, and cut costs in their hydraulic systems by creating custom integrated manifolds.
Command the Seas
Ship operators in the oil and gas industries who raise or lower pipes, gas wellheads, and other components to the sea floor must work despite surging and swelling waves or stormy weather. First generation Active Heave Compensators for Gusto BV, were built around an intelligent, rapidly controlled dual-function hydraulic cylinder platform.
Manifold Valves from IPT
2-, 3- and 5-way manifold valves combine the function of a tee, calibration valve, isolation valve and all tubings and fittings into a single valve configuration, and are designed to connect a system impulse line and transmitter.
