• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer

Mobile Hydraulic Tips

Mobile Hydraulic Tips focuses on pumps, fittings, valves, manifolds and other products and news in the Mobile Hydraulics industry.

  • Hydraulics Blog
  • Industry News
  • Engineering Basics
  • Components
    • Cylinders
    • Fittings / Couplings
    • Pumps / Motors
    • Sensors / Gauges
    • Valves / Manifolds
    • Related components
  • Design Guide Library
  • Advertise
  • SUBSCRIBE

hawehydraulics

New proportional directional valve with electronics for explosive areas

April 8, 2025 By Mary Gannon

HAWE-PSL-CAN-directional-valve

Manufacturers of mining machinery, oil and gas plants and chemical plants can now also use the tried-and-tested PSL-CAN directional spool valve with onboard electronics from HAWE Hydraulik in potentially explosive atmospheres. The actuating head has been redesigned to comply with current regulations such as ATEX, IECEx, MA and CCC. The combination of intelligent valve control, […]

Filed Under: Components, Featured, Valves / Manifolds Tagged With: hawehydraulics

HAWE’s MICK directional control valve provides efficient, safe control

April 3, 2025 By Mary Gannon

HAWE'S MICK provides efficiency and safety through combined mast and support control with CAN bus.

In mobile machinery, there are often functions that can run in sequence or even have to for safety reasons. With the MICK control block, HAWE Hydraulik has a compact and high-performance solution for this. Originally developed for the boom control of concrete pumps, size 2 is now coming onto the market following the successful market […]

Filed Under: Components, Valves / Manifolds Tagged With: hawehydraulics

Agriculture electrifies without bailing on hydraulics

December 6, 2023 By Rachael Pasini

Efficient farming is top of mind for the agricultural industry, but not at the environment’s expense. Though net-zero targets tend to push OEMs toward fully electric and even autonomous machines, there are ways to partially electrify without overhauling a design. HAWE Hydraulik provides examples of how to increase efficiency by electrifying functions strategically. Electrify work […]

Filed Under: Controls, Featured, HPUs, Industry News, Pumps / Motors Tagged With: hawehydraulics

Electrification for yard loaders and telehandlers from a single source

October 18, 2023 By Rachael Pasini

Electrically driven yard loaders and telehandlers have already been working successfully in agriculture and at transshipment points for some time. The drive concepts are constantly being optimized, and new components are coming onto the market. HAWE’s electrification experts advise on concept development and component selection. In electrification, the entire vehicle is often not redesigned, but […]

Filed Under: Industry News, System Design Tagged With: hawe, hawehydraulics

HAWE Hydraulik acquires 55% of the shares of Hydra-Fab Fluid Power Inc.

May 8, 2018 By Mary Gannon

Hydrafab_HAWE_2018-05-07

HAWE Hydraulik is pleased to announce that one of its strongest partners in Canada will now be part of the HAWE Group. As of June 1, HAWE Hydraulik will have acquired 55% of the shares of Hydra-Fab Fluid Power Inc., Ontario. The remaining 45% of shares will continue to be held by Richard Gores, who continues […]

Filed Under: Industry News Tagged With: hawe, hawehydraulics

HAWE North America announces new leadership, sales members

October 18, 2017 By Paul Heney

Hawe-Hydraulic-logo

HAWE North America has announced its new Executive Leadership team. Effective August 6, 2017, Robert “Bob” Pettit was promoted from the role as CTO to CEO and David “Dave” Stagg was promoted from North American Sales Manager to Chief Sales Officer. Pettit started with HAWE North America in 1997 and has worked as a part […]

Filed Under: Industry News Tagged With: hawehydraulics

HAWE North America names first service distributor partners

September 22, 2015 By Mike Santora

HAWE-Hydraulik-webpage-image

HAWE Hydraulik is a global manufacturer and supplier of hydraulic components and controls for the mobile, industrial, and renewable energy markets. HAWE Hydraulik, North America is proud to announce its first ever service partner distributors. Fluid Concepts Inc. (OH) and Central Hydraulics (PA) have accepted responsibility to market, distribute, install and service HAWE’s full line […]

Filed Under: Industry News Tagged With: hawehydraulics

New pump displacements for hydraulic fan controls

July 16, 2015 By Mike Santora

HAWE-V40M-for-Fan-controls

The new axial piston pump, type V40M-028H from HAWE Hydraulics is suitable for hydraulic fan controls in mobile machines. The pump will displace volumes up to 28-cm³/rev and is designed for maximum operating pressure of 380 bar and peak loads of 400 bar. The optional P1R1 controller features help the axial piston pump comply with […]

Filed Under: Components, Pumps / Motors Tagged With: hawehydraulics

HAWE Hydraulics announces new service partner program

May 28, 2015 By Mike Santora

NAPM-Meeting-image

During their North American Partner Meeting last month HAWE Hydraulics announced a new division to the company – HAWE Service Solutions, HSS. This year’s meeting took place in Vancouver, BC and connected HAWE’s North American distributors with HAWE employees from Germany and the US. For years this annual meeting has served as a way to […]

Filed Under: Industry News Tagged With: hawehydraulics

Hydraulic Weight Balancing Saves Electricity

November 4, 2013 By admin

Hydraulic-Weight-Balancing-Saves-ElectricityTH

HAWE Hydraulics, a global manufacturer and supplier of sophisticated hydraulic components and controls for the mobile, industrial, and renewable energy markets. For large machining centers, balancing the weight of spindle heads and work piece tables pays off. HAWE Hydraulics develops unique solutions that are both energy efficient and durable. These solutions reduce energy consumption while […]

Filed Under: Components, Hydraulic Equipment Components Tagged With: hawehydraulics

  • Page 1
  • Page 2
  • Go to Next Page »

Primary Sidebar

Fluid Power Design Guides

fluid
“mht
EXPAND YOUR KNOWLEDGE AND STAY CONNECTED
Get the latest info on technologies, tools and strategies for Fluid Power Professionals.

Fluid Power World Digital Editions

Fluid Power World is written by engineers for engineers engaged in designing machines and or equipment in Off-Highway, Oil & Gas, Mining, Packaging, Industrial Applications, Agriculture, Construction, Forestry, Medical and Material Handling. Fluid Power World covers pneumatics, mobile hydraulics and industrial hydraulics.

Footer

Mobile Hydraulic Tips

FLUID POWER WORLD NETWORK

  • Fluid Power World
  • Hose Assembly Tips
  • Pneumatic Tips
  • Sealing and Contamination Tips
  • Fluid Power Distributor Lookup

MOBILE HYDRAULIC TIPS

  • Subscribe to our newsletter
  • Advertise with us
  • Contact us
  • About us

Copyright © 2025 · WTWH Media LLC and its licensors. All rights reserved.
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media.

Privacy Policy