• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer

Mobile Hydraulic Tips

Mobile Hydraulic Tips focuses on pumps, fittings, valves, manifolds and other products and news in the Mobile Hydraulics industry.

  • Hydraulics Blog
  • Industry News
  • Engineering Basics
  • Components
    • Cylinders
    • Fittings / Couplings
    • Pumps / Motors
    • Sensors / Gages
    • Valves / Manifolds
    • Related components
  • Hydraulic Fluids
  • Suppliers
  • FIND A DISTRIBUTOR

HydraForce Introduces INTEGR8 line of Engineered Hydraulic Control Solutions

June 20, 2013 By scombest

Share

HydraForce has taken the guesswork out of specifying the most common hydraulic control schemes by providing engineered circuits featuring optimal flow and directional control valve combinations.  Called INTEGR8, the aim of these circuit configurations is to save engineering time and take some of the guesswork out of specifying the most common hydraulic control schemes.   This new engineered solutions package features more than 40 directional and flow control options that are easily integrated into a hydraulic circuit using i-Design 4.0 custom manifold design software.   INTEGR8 offers eight great advantages to the hydraulic market: innovation, system efficiency, serviceability, customizable, flexible, durable, optimal performance, and leakage prevention.

INTEGR8
INTEGR8 engineered hydraulic control solutions can be used to accelerate design time for excavators and other types of construction, material-handling and agricultural machinery.

Each option consists of optimally paired hydraulic cartridge valves packaged in a common hydraulic control scheme.  The valves are compatibly sized and configured to handle several ranges of hydraulic flow rates and operating pressures.  These common control schemes  are suitable for application on a large range of machinery including wheel loaders, telehandlers, excavators, material handling equipment, agricultural and harvesting equipment, industrial equipment, forestry equipment and other off-highway mobile machinery.

Each option is depicted with ISO graphic symbols in a hydraulic schematic that can be dragged and dropped to start a control circuit diagram in i-Design 4.0 manifold design software.  This built-in library of INTEGR8 schematics accelerates the design engineering process.

Flow control options include direct-acting, normally closed and normally open control schemes in flow ranges from 10 to 22 lpm (3 to 6 gpm); 37 to 70 lpm (10 to 18 gpm) and 55 to 106 lpm (14 to 28 gpm).  Operating pressures range from 207 bar (3000 psi) to 241 bar (3500 psi).

Cross-section of an energized direct-acting directional control INTEGR8 solution featuring a four-way electro-proportional cartridge valve working together with a pressure compensator, load-sense valve and check valve.  KEY:  A = Work Port A, B = Work Port B, P = Inlet Port, D = Drain Port, LS = Load Sense Port, T = Tank Port
Cross-section of an energized direct-acting directional control INTEGR8 solution featuring a four-way electro-proportional cartridge valve working together with a pressure compensator, load-sense valve and check valve. KEY: A = Work Port A, B = Work Port B, P = Inlet Port, D = Drain Port, LS = Load Sense Port, T = Tank Port

Directional control options include a choice of direct-acting or pilot-operated controls for operating pressures up to 240 bar (3500 psi).  Direct-acting options are available in flow ranges from 11 to 21 lpm (3 to 6 gpm). Pilot-operated options are offered in flow ranges from 32 to 83 lpm (8 to 22 gpm).

When using the INTEGR8 configurations as a starting point, hydraulic systems can be customized with additional function control features, all within a machine-specific, customer-specified housing construction.  Performance can be designed to incorporate a variety of features, including flow-sharing, compensation, pre-compensation, port pressure protection and more.

In keeping with the HydraForce philosophy of performance testing, each INTEGR8 control option has been fully tested to verify functionality and each cartridge valve carries a five-year warranty.

For more information on the HydraForce INTEGR8.

HydraForce
www.hydraforce.com

Filed Under: Components, Testing Equipment, Valves / Manifolds Tagged With: HydraForce

Primary Sidebar

Design Guides

Pneumatic Actuators Design Guide

Hydraulic Cylinders Design Guide
Subscribe Today

Fluid Power World Digital Editions

Fluid Power World Digital EditionBrowse the most current issue of Fluid Power World and back issues in an easy to use high quality format. Bookmark, share and interact with the leading design engineering magazine today.

Follow us on Twitter

Tweets by @wtwh_paulheney

Follow us on Twitter

Tweets by MHydraulicTips

Follow us on Twitter

Tweets by DW_MaryGannon

Footer

Mobile Hydraulic Tips

FLUID POWER WORLD NETWORK

  • Fluid Power World
  • Hose Assembly Tips
  • Pneumatic Tips
  • Sealing and Contamination Tips
  • Fluid Power Distributor Lookup

MOBILE HYDRAULIC TIPS

  • Subscribe to our newsletter
  • Advertise with us
  • Contact us
  • About us
Follow us on Twitter  Add us on Facebook  Follow us on LinkedIn  Follow us on YouTube  Follow us on Instagram

Copyright © 2021 · WTWH Media LLC and its licensors. All rights reserved.
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media.

Privacy Policy